usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model 060120A25X50-2 1 of 2 features: ? rohs compliant ? 10 watts ? dc ? 6.0 ghz ? al 2 0 3 ceramic ? non - nichrome resistive element ? low vswr ? 100% tested ? small size chip termination description the 060120A25X50-2 is high performance alumina (al 2 0 3 ) chip termination intended as a low cost al ternative to aluminum oxide (aln). the termination is well suited to all cellular frequency bands such as; amps, gsm, dcs, pcs, phs and umts.. the termination is also rohs compliant! general specifications resistive element thick film substrate al 2 o 3 ceramic terminal finish matte tin over nickel barrier operating temperature -55 to +125 c (see de rating chart) tolerance is all dimensions in inches. electrical specifications resistance value: 50 ohms, 2% power: 10 watts frequency range: dc ? 6.0 ghz return loss >19 db to 6.0 ghz specification based on unit properly insta lled using suggested mounting instructions and a 50 ohm nominal impedance. specifications subject to change. outline drawing unless otherwise specified dimensions are in inches 10 watts, 50
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 model 060120A25X50-2 typical performance: 060120A25X50-2 060120A25X50-2 power de-rating: mounting footprint and procedure: *actual performance could be limited by the solder properties of the application 2 of 2
|